Definition of Transmission dynamometer. Meaning of Transmission dynamometer. Synonyms of Transmission dynamometer

- A dynamometer or "dyno" is a device for simultaneously measuring the torque and rotational speed (RPM) of an engine, motor or other rotating prime mover...
- transfer a certain speed or torque from the internal combustion engine to a dynamometer. A "shaft guard" is used at a shaft connection to protect against contact...
- was never officially rated by the EPA in MPGe. In August 2007, Tesla dynamometer testing of a validation prototype on the EPA combined cycle yielded a...
- It is said that the official power output of 469 PS was the lowest dynamometer reading of all the CTR engines tested while the average figure was closer...
- determined by measuring the amount of available tractive force using a dynamometer, and then combining that data with coastdown data to obtain the available...
- Sulfuric Acid) (H2SO4) Distilled Water Voltage regulator Ammeter Clinometer Dynamometer Fuel gauge Manometer Hydrometer Odometer (also called milometer or mileometers)...
- bearing friction, transmission and gear box friction, etc. Brake horsepower (bhp) is the power measured using a brake type (load) dynamometer at a specified...
- Though officially rated at 250 hp (186 kW) and 340 lb⋅ft (461 N⋅m), dynamometer testing of the 20th Anniversary model tests regularly recorded over 300...
- 5000 rpm SAE gross and 490 lb⋅ft (664 N⋅m) at 4000 rpm of torque. In actual dynamometer testing, it produced 433.5 hp (323 kW; 440 PS) and 472 lb⋅ft (640 N⋅m)...
- industry-wide change in horsepower measurements from the gross method by a dynamometer outside a vehicle with no accessories installed to a SAE net method in...