Definition of Sprue. Meaning of Sprue. Synonyms of Sprue

Here you will find one or more explanations in English for the word Sprue. Also in the bottom left of the page several parts of wikipedia pages related to the word Sprue and, of course, Sprue synonyms and on the right images related to the word Sprue.

Definition of Sprue

Sprue
Sprue Sprue, n. [Etymol. uncertain.] 1. (Founding) (a) Strictly, the hole through which melted metal is poured into the gate, and thence into the mold. (b) The waste piece of metal cast in this hole; hence, dross. 2. (Med.) Same as Sprew.

Meaning of Sprue from wikipedia

- Look up sprue in Wiktionary, the free dictionary. A sprue may refer to: Sprue (manufacturing), a feature in molding and casting molds Coeliac disease...
- Tropical sprue is a malabsorption disease commonly found in tropical regions, marked with abnormal flattening of the villi and inflammation of the lining...
- atrophy seen on biopsy may also be due to unrelated causes, such as tropical sprue, giardiasis and radiation enteritis. While positive serology and typical...
- A sprue is a large diameter vertical channel through which liquid material is introduced into a mold. It connects the pouring basin to the runner. In...
- use registration marks to indicate exactly where they go. Spruing. The wax copy is sprued with a treelike structure of wax that will eventually provide...
- yields leftover metalincluding heads, risers, and sprue (sometimes collectively called sprue) — that can exceed 50% of the metal required to pour a...
- hookworm, which was endemic on the island at rates of 80%, and tropical sprue. An effective treatment for the latter had just been developed, although...
- shape. The metal is poured into the mold through a hollow channel called a sprue. The metal and mold are then cooled, and the metal part (the casting) is...
- The Celiac Sprue ****ociation (CSA) is the largest nonprofit celiac disease support group in the United States, with over 125 chapters and 65 resource...
- mouldmaker. Plastic resin enters the mould through a sprue or gate in the injection mould; the sprue bushing is to seal tightly against the nozzle of the...