- John
Gregory Roncz (25 May 1948 – 27
September 2023) was an
American aerodynamicist involved in the
development of over 50
different aircraft, ranging...
- the lead
designer for the project, and the
chief aerodynamicist was John
Roncz. The
airframe made of fibergl****,
carbon fiber, and
Kevlar weighed 939 pounds...
-
aeronautical engineer Graham Swannell and
American aerodynamicist John
Roncz were then
engaged to
design an
aircraft to meet then-current JAR VLA requirements...
-
aerodynamics by John
Roncz, and
built by
Scaled Composites. as the
Model 311.
Although their role was not
widely publicized,
Rutan and
Roncz, who had provided...
- in 2006 LAK Genesis — a
tailless glider developed by Jim
Marske and John
Roncz in the
United States. This
disambiguation page
lists articles ****ociated...
- 36 m) Wing area: 98 sq ft (9.1 m2) 106 sq ft (10 m2) 540T Airfoil: John
Roncz symmetrical Empty weight: 1,170 lb (531 kg) 1,319 lb (598 kg) 540T Max takeoff...
- out,
using the
bungee trim system. The new
canard was
designed with the
Roncz R1145MS airfoil,
which produces considerably more lift than the original...
- RV-9 was
built around a
newly designed high
aspect ratio wing,
featuring a
Roncz airfoil. It is
similar in size and
weight to the RV-6 and is externally...
- 0 m) span wing has a wing area of 94.00 sq ft (8.733 m2) and
employs a
Roncz R1145MS
airfoil for the
canard airfoil, and the main wing uses a modified...
- area: 102.44 sq ft (9.517 m2)
Aspect ratio: 10.78 Airfoil:
Roncz 517 (root),
Roncz 515 (tip),
Roncz 1052 (canard)
Empty weight: 380 lb (172 kg)
Gross weight:...