- In spark-ignition
internal combustion engines,
knocking (also knock, detonation,
spark knock,
pinging or pinking)
occurs when
combustion of some of the...
-
downsizing held back by low-speed
preignition problems?".
Retrieved 2015-02-02. "SwRI to
Launch Low-Speed
Preignition Prevention Program (P3) Consortium"...
- an
electronic 'Power Jet' system, in
efforts to
control lean
mixture preignition.
Included in the new
electrics was a
capacitor and a rectifier/regulator...
- ignite, the fuel must have a low
flash point, but in
order to
avoid preignition caused by
residual heat in a hot
combustion chamber, the fuel must have...
-
Commercial flash pots
include safety features such as
warning pilot lamps,
preignition grounding, and
safing circuits. They also use
isolated and low-voltage...
-
methylphosphonate is as a
flame ****ant.
Other commercial uses are a
preignition additive for gasoline, anti-foaming agent, plasticizer, stabilizer, textile...
- per cylinder. The flathead's
elongated combustion chamber is
prone to
preignition (or "knocking") if
compression ratio is increased, but
improvements such...
-
injection diesel engine as the glow
plugs greatly increase the risk of
preignition compared to
direct injection diesels.
Harry Ricardo Prosper L'Orange...
- Pre-ignition (or
preignition) in a spark-ignition
engine is a
technically different phenomenon from
engine knocking, and
describes the
event wherein the...
-
manner or in
unburnt residues (engine knocking) or
premature ignition (
preignition). When a
hydrocarbon is burned, a
large number of
different oxygen radicals...
