- A
bipin or
bi-
pin (sometimes
referred to as two-
pin,
bipin cap or
bipin socket) is a type of lamp ****ing. They are
included in the IEC
standard "IEC 60061...
- 3'
TACGTA 5' ---ATGCA T--- 3' 3' ---T ACGTA--- 5' Bfr
BI, Csp68KIII, Mph1103I, NsiI,
PinBI, Ppu10I, SspD5II, Zsp2I ****AI
Streptomyces exfoliatus 5'...
- J,
Turna J (March 1993). "Some
properties of
restriction endonuclease Apa
BI from
Acetobacter pasteuri****".
Biochim Biophys Acta. 1162 (3): 323–5. doi:10...
- 3'
TACGTA 5' ---ATGCA T--- 3' 3' ---T ACGTA--- 5' Bfr
BI, Csp68KIII, EcoT22I, NsiI,
PinBI, Ppu10I, SepI, SspD5II MroI
Micrococcus roseus 5' TCCGGA...
- 9 mm (0.35433 in)
pin spacing G12 – 12 mm (0.47244 in)
pin spacing Medium bi-
pin is used on each end of a T12
fluorescent lamp Mini
bi-
pin is used with MR16...
-
patented locking system with two sidebars, 12
pins, and 12 springs. In the New
Generation Bilock, a
trigger pin has been
added to
increase security and extend...
-
status pins.
While the IBM
solution could support this, it was not
trivial to
implement and was not at that time
being supported. This led to the
Bi-Tronics...
- the
status pins of the
original port to form a 4-bit
parallel port for
sending arbitrary data back to the host. A
further modification, "
Bi-Directional"...
- are
fabricated in CMOS or
BiCMOS
technology rather than TTL. Surface-mount
parts with a
single gate (often in a 5-
pin or 6-
pin package) are
prefixed with...
-
pin). Many
sockets have a
third receptacle or
pin for a
safety connection to
earth ground. The plug is a male connector,
usually with
protruding pins...