- A
photopolymer or light-activated
resin is a
polymer that
changes its
properties when
exposed to light,
often in the
ultraviolet or
visible region of the...
-
create raised surface printing plates from a
negative and a
photopolymer plate.
Photopolymer plates are
light sensitive. On one side the
surface is cured...
-
using photopolymer plates.
After engraving, the
photopolymer is
exposed through the
imaged black layer and
washed out in the
traditional photopolymer process...
-
surface of a vat
filled with a
liquid photopolymer. The beam is
focused onto the
surface of the
liquid photopolymer,
creating each
layer of the desired...
- be
carved from a
potato or
other semi-rigid food item. Furthermore,
photopolymer stamps are
gaining po****rity. They are most
often produced in a set...
-
bonds in acrylates.
Polymerization occurs when
photopolymers are
exposed to
light when
photopolymers contain chromop****s, otherwise, the
addition of...
-
Stereolithography (SLA) → a laser-cured
photopolymer for
materials such as thermoplastic-like
photopolymers.
Selective laser sintering (SLS) → a laser-sintered...
- of poly(phthalaldehyde)".
Journal of
Photopolymer Science and Technology. 6 (4): 491. doi:10.2494/
photopolymer.6.491. B. Zoecklein, K. Fugelsang, B....
- Computer-to-plate (CTP) is an
imaging technology used in
modern printing processes. In this technology, an
image created in a
desktop publishing (DTP)...
-
process can
differ depending on
whether solid sheets of
photopolymer or
liquid photopolymer are used, but the
principle is
still the same. The plate...