-
speak PPPoE. (Note that in this case, the
PPPoE-over-DSL side of
things is
occasionally referred to as
PPPoEoA, for ‘
PPPoE over ATM’.) or when a
PPPoE-speaking...
-
derivatives of PPP, Point-to-Point
Protocol over
Ethernet (
PPPoE) and Point-to-Point
Protocol over ATM (
PPPoA), are used most
commonly by ISPs to
establish a digital...
-
bytes for PPP and 8
bytes for
PPPoA (with the RFC2364 VC-MUX option) = 10 bytes. It also
avoids the
issues that
PPPoE suffers from,
related to sometimes...
- frames,
allow for an MTU up to 9000 bytes. However,
border protocols like
PPPoE will
reduce this. Path MTU
Discovery exposes the
difference between the...
-
without using PPPoE. It
directly encapsulates the IP
datagrams in
Ethernet frames,
using the
standard RFC 894 encapsulation. The use of IPo
E addresses the...
- IPv6 on a dual-stack
PPPoE connection and 16%
already do. ER-Telecom
offers native IPv6 to
customers since 10.10.2013
using PPPoE Dual-Stack and DHCPv6...
- Links) ARP
Address Resolution Protocol MPLS
Multiprotocol Label Switching PPPoE Point-to-Point
Protocol over
Ethernet TIPC
Transparent Inter-process Communication...
- as DSL, if Point-to-Point
Protocol over
Ethernet (
PPPoE) or Point-to-Point
Protocol over ATM (
PPPoA) is used. The role of pppd is
managing PPP session...
- to 1600
bytes is
required in
Carrier Ethernet networks.
Jumbo frames for
PPPoE is
defined in RFC 4638, with the
purpose of
removing the old 1492-byte limit...
- port 1723 for control, GRE for data): Point-to-Point
Tunneling Protocol PPPoE (EtherType 0x8863 for control, 0x8864 for data): Point-to-Point Protocol...
