Definition of Overboring. Meaning of Overboring. Synonyms of Overboring

Here you will find one or more explanations in English for the word Overboring. Also in the bottom left of the page several parts of wikipedia pages related to the word Overboring and, of course, Overboring synonyms and on the right images related to the word Overboring.

Definition of Overboring

No result for Overboring. Showing similar results...

Meaning of Overboring from wikipedia

- Overbore cartridges are those with a relatively large case volume or case capacity, coupled with a relatively small diameter bullet. The case volume or...
- tight 18 mm (0.71 in) to an extreme overbore of 20 mm (0.79 in). Some also claim an increased velocity with the overbored barrels, up to 15 m/s (49 ft/s)...
- the 835's overbored barrel. The non-overbored barrel of the 535 does, however, allow the use of slugs, which cannot be used in the overbored barrel of...
- the 6G7 Di-D quad-turbo diesel and a 4.0L V6 petrol, both based on an overbored and stroked 6G75 MIVEC. In 2017, Cristina Gutiérrez debuted her international...
- NHRA and AHRA drag racing. Its large casting allowed the engine to be overbored and stroked to displacements unattainable in the other engines of the...
- displacement. The first 283 motors used the stock 265 blocks. However, the overbore to these blocks resulted in thin cylinder walls. ****ure 283 blocks were...
- percentages. This means cartridges with a small bore area to case volume ratio (overbore cartridges) combined with a high operating pressure benefit more from recoil...
- Skyline GT-R. Some cars from the first editions series are the Backdraft, Overbored 454, and Super Tsunami. Hot Wheels celebrated its 35th anniversary with...
- method of increasing engine displacement, usually in combination with overboring. One of the most important innovations in the Ford flathead V8 was the...
- called "overbore", when the as-built diameter exceeds the nominal actual diameter of 18.5 mm (0.73 in). The advantages touted for "overbore" are a perceived...