- A
multiswitch is a
device used with a dual or
quattro LNB to
distribute satellite TV
signals to
multiple (usually more than four)
receivers from a single...
- for
connection to a
multiswitch (the term and the LNBs fell out of use with the
introduction of the
Universal LNB and the
multiswitch equivalent, the quattro...
-
cables from the LNB to a '
multiswitch'
switching matrix,
which allows the
connection of
multiple receivers to the
multiswitch in a star
topology using...
- the
antenna equipment (either
multiple LNBs, a multi-output LNB or a
multiswitch distribution system)
because of the
large bandwidth requirement of the...
- 2250–3000 MHz, are used.
Newer LNBFs in use by DirecTV,
called SWM (Single Wire
Multiswitch), are used to
implement single cable distribution and use a
wider frequency...
- used in SP1
switch was
similar but even smaller. The ITT
Pentaconta Multiswitch of the same era had
usually 22 verticals, 26 levels, and six to twelve...
-
supplied as
required to each of the
multiple outlets connected to an IF
multiswitch. In an
optical fibre system at the LNB the four sub-bands are "stacked"...
-
conventional receiver operation), in a
distribution device analogous to an IF
multiswitch positioned close to the antenna, or even at the
antenna itself in the...
-
satellites at 28° East will
require a
separate feed and a
DiSEqC or
Multiswitch with a
Diseqc compatible receiver. 2rn
state that a dish of 1
metre (40")...
