- A
monotube steam generator is a type of
steam generator consisting of a
single tube,
usually in a multi-layer spiral, that
forms a once-through
steam generator...
- FQ-300, 320, 340 – 6-speed,
Bilstein monotube shocks, AYC (Active Yaw Control). FQ-360 – 6-speed,
Bilstein monotube shocks, AYC (Active Yaw Control), Ralliart...
- in
which water is
heated under pressure Heat
recovery steam generator Monotube steam generator Supercritical steam generator or
Benson boiler, a high-pressure...
-
conventional flexible discs or shims.
Spool valving can be
applied with
monotube, twin-tube, or position-sensitive packaging, and is
compatible with electronic...
- unequal-length wishbones, push-rods, coil springs,
Bilstein gas-pressurised
monotube dampers,
electronic adaptive damping,
electronic height adjustment (40 mm...
-
construction is as a
spiral coil of water-tube,
arranged as a single, or
monotube, coil.
Circulation is once-through and
pumped under pressure, as a forced-circulation...
-
valves or even
small moving parts that can wear. This
system consists of
monotube dampers, one on each
corner of the vehicle, a
sensor set, and an ECU (electronic...
-
water is
pumped through them. A
flash boiler differs from the type of
monotube steam generator in
which the tube is
permanently filled with water. In...
- used by the
French Army, and sold for export. The 20 mm F2 is a
mounted monotube gun, with two 150-cartridge
boxes on each side of the piece. An electrical...
- Vol. I, to 1925. Ian Allan. p. 351. Harris,
Model Boilers, p. 56–58. "
Monotube steam generator".
Light Steam Power. XXIV (3): 157–159. July–September...
