Definition of Milliampere. Meaning of Milliampere. Synonyms of Milliampere

Here you will find one or more explanations in English for the word Milliampere. Also in the bottom left of the page several parts of wikipedia pages related to the word Milliampere and, of course, Milliampere synonyms and on the right images related to the word Milliampere.

Definition of Milliampere

Milliampere
Milliampere Mil`li*am`p[`e]re", n. [Milli- + amp[`e]re.] (Elec.) The thousandth part of one amp[`e]re.

Meaning of Milliampere from wikipedia

- daA decaampere 10−2 A cA centiampere 102 A hA hectoampere 10−3 A mA milliampere 103 A kA kiloampere 10−6 A μA microampere 106 A MA megaampere 10−9 A...
- one ampere flowing for one hour, or 3,600 coulombs. The commonly seen milliampere-hour (symbol: mA⋅h, mA h, often simplified as mAh) is one-thousandth...
- milliampere heater. Most commonly used in television receivers with series heater strings 13CW4 - same as 6CW4, but with 12.6 Volt / 230 milliampere heater...
- being measured. Instruments used to measure smaller currents, in the milliampere or microampere range, are designated as milliammeters or microammeters...
- (non-rechargeable) zinc–carbon (dry cell) AA batteries have around 400–900 milliampere hours capacity, with measured capacity highly dependent on test conditions...
- polar was used when a 60 milliampere connection could not be achieved, provided a ground return polar circuit using 35 milliamperes on separate send and receive...
- The coulomb (symbol: C) is the unit of electric charge in the International System of Units (SI). It is defined to be equal to the electric charge delivered...
- example, a meter with a sensitivity of 1000 ohms per volt would draw 1 milliampere at full scale voltage; if the full scale was 200 volts, the resistance...
- Eight gigabytes of storage One gigabyte of random-access memory 2600 milliampere-hour lithium-ion battery MicroSD slot Adreno 306 Vivante GC7000UL (Value...
- In electrical signalling an analog current loop is used where a device must be monitored or controlled remotely over a pair of conductors. Only one current...