-
aircraft had
multiple gun
positions including single mounts at each
midship beam and
stern above the tail cone.
Additional guns were
positioned in the...
-
trawlers with aft
superstructure and
midship working deck are
usually beam trawlers (see below).
These use
large beams to rig the trawls.
Outrigger trawlers...
-
anchorage for a ship. All
dimensions have
rigorous symbolic meaning. The
midship beam of the hull
corresponds to the
diameter of the Earth, the ray of each...
- conceptualization.
Project Mille's
prototype featured the
diesel generators at
midship, a
wider hull, a
narrower superstructure, and a
relocation of heavy-weight...
- T_{WL}}}}
Midship coefficient (Cm or Cx) is the cross-sectional area (Ax) of the
slice at
midships (or at the
largest section for Cx)
divided by
beam x draft...
- 12-foot (3.7 m) high by 22-foot (6.7 m) wide LED screen.
Located by the
midship pool on the Lido deck, it is used to show movies,
sporting events, concerts...
-
afterbrow On
larger ships, a
secondary gangway rigged in the area
abaft of
midship. On some
military vessels, such as US
naval vessels,
enlisted personnel...
-
parabola curve and
Scott Russell's
positioning of
midship section (defined as
section with
widest beam) that was well aft of
amidships and with
sharp bow...
-
remarkable balance of all
effective centers of
effort and
resistance on her
midship section line," but
cautioned that
Spray was "the
worst possible boat for...
- anti-aircraft gun. Its
torpedo tubes were four in the bows, four in the
midship section firing to the sides, and two were
mounted on the deck in rotating...
