-
divided into
three classes: macro,
micro and
nanoindentation tests.
Microindentation tests typically have
forces less than 2 N (0.45 lbf). Hardness, however...
-
secondary phases,
grain boundaries, pores, micro-cracks and
hardness microindentations. Most bulk mechanical, optical, thermal,
electrical and
magnetic properties...
- in hardness. The
effect has been seen
through nanoindentation and
microindentation measurements at
varying depths.
Dislocations increase material hardness...
-
lubricating applications can be
increased by
doping MoS2 with Cr.
Microindentation experiments on
nanopillars of Cr-doped MoS2
found that the
yield strength...
- CdSe
Nanorods Evaluation of Young's
modulus of
polymers from
Knoop microindentation tests Characterization of
polymer surface structure and
surface mechanical...
- are
among the
earliest tellurides to form; they have
relatively high
microindentation hardness values,
increased relief, and a
pronounced tendency toward...
- E-4 on Metallography,
International Metallographic Society (1986),
Microindentation Techniques in
Materials Science and Engineering, ASTM International...
- of 9.383.
Twinning is
rarely observed.
Braggite was
found to have
microindentation VHN
values ranging from 973–1015.
Bannister and Hey
discovered and...
-
procedure to ****ess
cortical bone at the tissue-level in vivo
using impact microindentation". Bone Reports. 5: 181–185. doi:10.1016/j.bonr.2016.07.004. PMC 5152622...
