-
appear with
imperial or US
units except in some
special cases (e.g.,
microinch, kilofoot, kilopound). They are also used with
other specialised units...
- means." The
minimum conditions for
wringability are a
surface finish of 1
microinch (0.025 μm) AA or better, and a
flatness of at
least 5 μin (0.13 μm). There...
- The
cylinder bores were
rough and finish-honed
conventionally to a 7-
microinch (180 nm)
finish then
etched by a then-new electro-chemical process. The...
- a {\displaystyle Ra} is a
dimensional unit that can be
micrometer or
microinch.
Since these parameters reduce all of the
information in a
profile to...
- processing. The
surface finish of the
cylinder barrel is
typically 4 to 16
microinch.
Honing process and
Skiving &
Roller burnishing (SRB)
process are the...
-
barrel (symbol bbl), bit (symbol b), foot (symbol ft), inch (symbol in),
microinch (symbol μin),
kibibyte (symbol KiB),
kilowatthour (symbol kWh), quart...
- 1973. pp. 2–16. "A Two-Hundred-Foot
Yardstick with
Graduations Every Microinch (cover story)" (PDF). HP Journal. No. 8. 1970. pp. 2–9. "ORCA: Optimized...
- removed, a 500
microinch (12.700 micrometer)
nickel coating was
applied to the
bronze using brush electroplating. Then a 160
microinch (4.0640 micrometer)...