-
Inrush current,
input surge current, or switch-on
surge is the
maximal instantaneous input current drawn by an
electrical device when
first turned on....
- An
inrush current limiter is a
component used to
limit inrush current to
avoid gradual damage to
components and
avoid blowing fuses or
tripping circuit...
-
allows them to be used for
limiting current to cold circuits, e.g. for
inrush current protection, or for
limiting current to hot circuits, e.g. to prevent...
- in a high
voltage DC
application is a
preliminary mode
which limits the
inrush current during the
power up procedure. A high-voltage
system with a large...
-
correspondingly lower inrush current.: 24 Nevertheless, across-the line
starting of
induction motors is
accompanied by
inrush currents up to 7-10 times...
-
conductor having compatible impedance." An
inrush current limiter is a
device or
devices combination used to
limit inrush current. P****ive
resistive components...
-
characteristic of the motor. Wound-rotor
motors can be
started with low
inrush current, by
inserting high
resistance into the
rotor circuit; as the motor...
- is dry
where ships were
sailing just before; and the rivers,
under the
inrush of the
flood tide, when the
whole force of the sea is
directed against them...
-
becomes a
handicap when a CVT is used in an
application with
moderate to high
inrush current, like motors,
transformers or magnets. In this case, the CVT has...
- removed. When
power is then reapplied, the
residual field will
cause a high
inrush current until the
effect of the
remaining magnetism is reduced, usually...
