Here you will find one or more explanations in English for the word Enter.
Also in the bottom left of the page several parts of wikipedia pages related to the word Enter and, of course, Enter synonyms and on the right images related to the word Enter.
No result for Enter. Showing similar results...
Antidysenteric
Antidysenteric An`ti*dys`en*ter"ic, a. (Med.)
Good against dysentery. -- n. A medicine for dysentery.
AntirenterAntirenter An`ti*rent"er, n.
One opposed to the payment of rent; esp. one of those who in
1840-47 resisted the collection of rents claimed by the
patroons from the settlers on certain manorial lands in the
State of New York. -- An`ti*rent"ism, n. Archenteric
Archenteric Arch`en*ter"ic, a. (Biol.)
Relating to the archenteron; as, archenteric invagination.
ArchenteronArchenteron Arch`en"ter*on, n. [Pref. arch- + Gr. ?
intestine.] (Biol.)
The primitive enteron or undifferentiated digestive sac of a
gastrula or other embryo. See Illust. under Invagination. Assenter
Assenter As*sent"er, n.
One who assents.
Augmenter
Augmenter Aug*ment"er, n.
One who, or that which, augments or increases anything.
CarpenterCarpenter Car"pen*ter, n. [OF. carpentier, F. charpentier, LL.
carpentarius, fr. L. carpentum wagon, carriage.]
An artificer who works in timber; a framer and builder of
houses, ships, etc.
Syn: Carpenter, Joiner.
Usage: The carpenter frames and puts together roofs,
partitions, floors, and other structural parts of a
building. The joiner supplies stairs, doors shutters,
mantelpieces, cupboards, and other parts necessary to
finishing the building. In America the two trades are
commonly united.
Carpenter ant (Zo["o]l.), any species of ant which gnaws
galleries in the wood of trees and constructs its nests
therein. They usually select dead or somewhat decayed
wood. The common large American species is Formica
Pennsylvanica.
Carpenter bee (Zo["o]l.), a large hymenopterous insect of
the genus Xylocopa; -- so called because it constructs
its nest by gnawing long galleries in sound timber. The
common American species is Xylocopa Virginica. Carpenter antCarpenter Car"pen*ter, n. [OF. carpentier, F. charpentier, LL.
carpentarius, fr. L. carpentum wagon, carriage.]
An artificer who works in timber; a framer and builder of
houses, ships, etc.
Syn: Carpenter, Joiner.
Usage: The carpenter frames and puts together roofs,
partitions, floors, and other structural parts of a
building. The joiner supplies stairs, doors shutters,
mantelpieces, cupboards, and other parts necessary to
finishing the building. In America the two trades are
commonly united.
Carpenter ant (Zo["o]l.), any species of ant which gnaws
galleries in the wood of trees and constructs its nests
therein. They usually select dead or somewhat decayed
wood. The common large American species is Formica
Pennsylvanica.
Carpenter bee (Zo["o]l.), a large hymenopterous insect of
the genus Xylocopa; -- so called because it constructs
its nest by gnawing long galleries in sound timber. The
common American species is Xylocopa Virginica. Carpenter beeCarpenter Car"pen*ter, n. [OF. carpentier, F. charpentier, LL.
carpentarius, fr. L. carpentum wagon, carriage.]
An artificer who works in timber; a framer and builder of
houses, ships, etc.
Syn: Carpenter, Joiner.
Usage: The carpenter frames and puts together roofs,
partitions, floors, and other structural parts of a
building. The joiner supplies stairs, doors shutters,
mantelpieces, cupboards, and other parts necessary to
finishing the building. In America the two trades are
commonly united.
Carpenter ant (Zo["o]l.), any species of ant which gnaws
galleries in the wood of trees and constructs its nests
therein. They usually select dead or somewhat decayed
wood. The common large American species is Formica
Pennsylvanica.
Carpenter bee (Zo["o]l.), a large hymenopterous insect of
the genus Xylocopa; -- so called because it constructs
its nest by gnawing long galleries in sound timber. The
common American species is Xylocopa Virginica. Carpentering
Carpentering Car"pen*ter*ing, n.
The occupation or work of a carpenter; the act of working in
timber; carpentry.
Cementer
Cementer Ce*ment"er, n.
A person or thing that cements.
Center
Center Cen"ter, or Centre Cen"tre, seal seal . (Gas
Manuf.)
A compound hydraulic valve for regulating the passage of the
gas through a set of purifiers so as to cut out each one in
turn for the renewal of the lime.
Center
Center Center, or Centre Centre, punch punch . (Mech.)
(a) A punch for making indentations or dots in a piece of
work, as for suspension between lathe centers, etc.
(b) A punch for punching holes in sheet metal, having a small
conical center to insure correct locating.
CenterCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center
Center Cen"ter, Centre Cen"tre, v. t.
1. To place or fix in the center or on a central point.
--Milton.
2. To collect to a point; to concentrate.
Thy joys are centered all in me alone. --Prior.
3. (Mech.) To form a recess or indentation for the reception
of a center.
Center of aCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of a fleetCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of an armyCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of curvature of a curveCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of flotationFlotation Flo*ta"tion, n. [Cf. F. flottation a floating,
flottaison water line, fr. flotter to float. See Flotilla.]
1. The act, process, or state of floating.
2. The science of floating bodies.
Center of flotation. (Shipbuilding)
(a) The center of any given plane of flotation.
(b) More commonly, the middle of the length of the load
water line. --Rankine.
Plane, or Line, of flotation, the plane or line in which
the horizontal surface of a fluid cuts a body floating in
it. See Bearing, n., 9
(c) .
Surface of flotation (Shipbuilding), the imaginary surface
which all the planes of flotation touch when a vessel
rolls or pitches; the envelope of all such planes. Center of gravityCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of gravity 3. Importance, significance, dignity, etc; hence,
seriousness; enormity; as, the gravity of an offense.
They derive an importance from . . . the gravity of
the place where they were uttered. --Burke.
4. (Physics) The tendency of a mass of matter toward a center
of attraction; esp., the tendency of a body toward the
center of the earth; terrestrial gravitation.
5. (Mus.) Lowness of tone; -- opposed to acuteness.
Center of gravity See under Center.
Gravity battery, See Battery, n., 4.
Specific gravity, the ratio of the weight of a body to the
weight of an equal volume of some other body taken as the
standard or unit. This standard is usually water for
solids and liquids, and air for gases. Thus, 19, the
specific gravity of gold, expresses the fact that, bulk
for bulk, gold is nineteen times as heavy as water. Center of gyrationCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of gyrationGyration Gy*ra"tion, n.
1. The act of turning or whirling, as around a fixed center;
a circular or spiral motion; motion about an axis;
rotation; revolution.
The gyrations of an ascending balloon. --De Quincey.
If a burning coal be nimbly moved round in a circle,
with gyrations continually repeated, the whole
circle will appear like fire. --Sir I.
Newton.
2. (Zo["o]l.) One of the whorls of a spiral univalve shell.
Center of gyration. (Mech.) See under Center.
Radius of gyration the distance between the axis of a
rotating body and its center of gyration. --Rankine. Center of inertiaInertia In*er"ti*a, n. [L., idleness, fr. iners idle. See
Inert.]
1. (Physics) That property of matter by which it tends when
at rest to remain so, and when in motion to continue in
motion, and in the same straight line or direction, unless
acted on by some external force; -- sometimes called vis
inerti[ae].
2. Inertness; indisposition to motion, exertion, or action;
want of energy; sluggishness.
Men . . . have immense irresolution and inertia.
--Carlyle.
3. (Med.) Want of activity; sluggishness; -- said especially
of the uterus, when, in labor, its contractions have
nearly or wholly ceased.
Center of inertia. (Mech.) See under Center. Center of inertiaCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of motionCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of oscillationOscillation Os`cil*la"tion, n. [L. oscillatio a swinging.]
1. The act of oscillating; a swinging or moving backward and
forward, like a pendulum; vibration.
2. Fluctuation; variation; change back and forth.
His mind oscillated, undoubtedly; but the extreme
points of the oscillation were not very remote.
--Macaulay.
Axis of oscillation, Center of oscillation. See under
Axis, and Center. Center of oscillationCenter Cen"ter, n. [F. centre, fr. L. centrum, fr. round which
a circle is described, fr. ? to prick, goad.]
1. A point equally distant from the extremities of a line,
figure, or body, or from all parts of the circumference of
a circle; the middle point or place.
2. The middle or central portion of anything.
3. A principal or important point of concentration; the
nucleus around which things are gathered or to which they
tend; an object of attention, action, or force; as, a
center of attaction.
4. The earth. [Obs.] --Shak.
5. Those members of a legislative assembly (as in France) who
support the existing government. They sit in the middle of
the legislative chamber, opposite the presiding officer,
between the conservatives or monarchists, who sit on the
right of the speaker, and the radicals or advanced
republicans who occupy the seats on his left, See Right,
and Left.
6. (Arch.) A temporary structure upon which the materials of
a vault or arch are supported in position until the work
becomes self-supporting.
7. (Mech.)
(a) One of the two conical steel pins, in a lathe, etc.,
upon which the work is held, and about which it
revolves.
(b) A conical recess, or indentation, in the end of a
shaft or other work, to receive the point of a center,
on which the work can turn, as in a lathe.
Note: In a lathe the
live center is in the spindle of the head stock; the
dead center is on the tail stock.
Planer centers are stocks carrying centers, when the object
to be planed must be turned on its axis.
Center of an army, the body or troops occupying the place
in the line between the wings.
Center of a curve or surface (Geom.)
(a) A point such that every line drawn through the point
and terminated by the curve or surface is bisected at
the point.
(b) The fixed point of reference in polar co["o]rdinates.
See Co["o]rdinates.
Center of curvature of a curve (Geom.), the center of that
circle which has at any given point of the curve closer
contact with the curve than has any other circle whatever.
See Circle.
Center of a fleet, the division or column between the van
and rear, or between the weather division and the lee.
Center of gravity (Mech.), that point of a body about which
all its parts can be balanced, or which being supported,
the whole body will remain at rest, though acted upon by
gravity.
Center of gyration (Mech.), that point in a rotating body
at which the whole mass might be concentrated
(theoretically) without altering the resistance of the
intertia of the body to angular acceleration or
retardation.
Center of inertia (Mech.), the center of gravity of a body
or system of bodies.
Center of motion, the point which remains at rest, while
all the other parts of a body move round it.
Center of oscillation, the point at which, if the whole
matter of a suspended body were collected, the time of
oscillation would be the same as it is in the actual form
and state of the body.
Center of percussion, that point in a body moving about a
fixed axis at which it may strike an obstacle without
communicating a shock to the axis.
Center of pressure (Hydros.), that point in a surface
pressed by a fluid, at which, if a force equal to the
whole pressure and in the same line be applied in a
contrary direction, it will balance or counteract the
whole pressure of the fluid. Center of percussionPercussion Per*cus"sion, n. [L. percussio: cf. F. percussion.
See Percuss.]
1. The act of percussing, or striking one body against
another; forcible collision, esp. such as gives a sound or
report. --Sir I. Newton.
2. Hence: The effect of violent collision; vibratory shock;
impression of sound on the ear.
The thunderlike percussion of thy sounds. --Shak.
3. (Med.) The act of tapping or striking the surface of the
body in order to learn the condition of the parts beneath
by the sound emitted or the sensation imparted to the
fingers. Percussion is said to be immediate if the blow is
directly upon the body; if some interventing substance, as
a pleximeter, is, used, it is called mediate.
Center of percussion. See under Center.
Percussion bullet, a bullet containing a substance which is
exploded by percussion; an explosive bullet.
Percussion cap, a small copper cap or cup, containing
fulminating powder, and used with a percussion lock to
explode gunpowder.
Percussion fuze. See under Fuze.
Percussion lock, the lock of a gun that is fired by
percussion upon fulminating powder.
Percussion match, a match which ignites by percussion.
Percussion powder, powder so composed as to ignite by
slight percussion; fulminating powder.
Percussion sieve, Percussion table, a machine for sorting
ores by agitation in running water.
Meaning of Enter from wikipedia
- Look up
enter in Wiktionary, the free dictionary.
Enter or
ENTER may
refer to:
Enter key, on
computer keyboards Enter, Netherlands, a
village Enter (magazine)...
- "
Enter Sandman" is a song by
American heavy metal band Metallica. It is the
opening track and lead
single from
their self-titled
fifth album, released...
-
Enter Shikari are a
British rock band
formed in St
Albans in 1999 by b****ist
Chris Batten, lead
vocalist and
keyboardist Rou Reynolds, and
drummer Rob...
- On
computer keyboards, the
enter key ⌅
Enter and
return key ↵
Return are two
closely related keys with
overlapping and
distinct functions dependent on...
-
Enter the
Dragon (Chinese: 龍爭虎鬥) is a 1973
martial arts film
directed by
Robert Clouse and
written by
Michael Allin. The film
stars Bruce Lee, John Saxon...
-
Enters the
Colossus is the
debut EP by
American hip hop
artist Mr. Lif. It was
released November 14, 2000, on the Def Jux
record label. "DataBlend" – 3:20...
-
Enter the
Matrix is a 2003 action-adventure
video game
developed by
Shiny Entertainment and
published by
Infogrames under the
Atari brand name. The first...
-
Enteral administration is food or drug
administration via the
human gastrointestinal tract. This
contrasts with
parenteral nutrition or drug administration...
-
Enter the Void is a 2009 English-language art film
written and
directed by
Gaspar Noé and
starring Nathaniel Brown, Paz de la Huerta, and
Cyril Roy. A...
-
Enter the
Haggis is a
Canadian Celtic rock band
based in Toronto. The band was
founded in 1995 by
Craig Downie, the only
remaining original member in...
