- electronics,
desoldering is the
removal of
solder and
components from a
circuit board for troubleshooting, repair, replacement, and salvage.
Desoldering tools...
-
prior to
resoldering —
desoldering braids (or wicks) or
vacuum desoldering equipment (solder suckers) can be used.
Desoldering wicks contain plenty of...
- probes.
Desoldering the
chips is done
carefully and slowly, so that the heat does not
destroy the chip or data.
Before the chip is
desoldered the PCB...
-
pickup tool, and a
soldering head; a
desoldering station will have a
desoldering head with
vacuum pump for
desoldering through-hole components, and a soldering...
-
tools for
soldering are:
contact soldering irons;
desoldering tweezers or SMD hot tweezers;
desoldering gun; hot air gun;
infrared heater.
Soldering iron...
- weight: 49% Bi, 18% Pb, 21% In, 12% Sn. It is also
known as
ChipQuik desoldering alloy. and Lens
Alloy 136, used for
mounting lenses and
other optical...
-
refinish of a
printed circuit board (PCB) ****embly,
usually involving desoldering and re-soldering of surface-mounted
electronic components (SMD). M****...
-
melting point,
close to that of the
material itself, to
prevent the
joint desoldering during firing in the
enameling process. The
remaining solder types are...
-
soldering iron.
Without developed skill, when
manually soldering or
desoldering a component, it is easy to
accidentally reflow the
solder of an adjacent...
-
Desoldering of a 1210
capacitor using no flux....
