-
droplets of
water are
nonconducting (when
deionized) and are less
likely to
damage sensitive equipment.
Deionized water, however, is
inherently acidic, and...
-
Capacitive deionization (CDI) is a
technology to
deionize water by
applying an
electrical potential difference over two electrodes,
which are
often made...
- Specifically, DEF is an
aqueous urea
solution made with 32.5% urea and 67.5%
deionized water. DEF is
consumed in a
selective catalytic reduction (SCR) that lowers...
-
contamination (ionic clean) The
wafers are
prepared by
soaking them in
deionized water. If they are
grossly contaminated (visible residues), they may require...
-
biological laboratories, as well as in industry, in some appliances,
deionized water or
reverse osmosis water can be used
instead of
distilled water...
-
hydrophilic and
hydrophobic compounds. UPW and the
commonly used term
deionized (DI)
water are not the same. In
addition to the fact that UPW has organic...
- as cost and
limited operational envelope. In the
electronics industry,
deionized water is used to
rinse components during manufacturing. This is necessary...
- 30 °C. The
temperature dependence of the
electrical conductivity of
fully deionized water without CO2
saturation is
comparably low in
relation to
these data...
- oven or HCl burner. The
resulting hydrogen chloride gas is
absorbed in
deionized water,
resulting in
chemically pure
hydrochloric acid. This
reaction can...
-
designed hardware and
components and more
powerful Marx generators. The
deionized water section of the
machine has been
reduced to
about half the previous...