Definition of Creepage. Meaning of Creepage. Synonyms of Creepage

Here you will find one or more explanations in English for the word Creepage. Also in the bottom left of the page several parts of wikipedia pages related to the word Creepage and, of course, Creepage synonyms and on the right images related to the word Creepage.

Definition of Creepage

No result for Creepage. Showing similar results...

Meaning of Creepage from wikipedia

- the leakage path along the surface from one end to the other, called the creepage length, to minimise these leakage currents. To accomplish this the surface...
- carried out by testing and certification laboratories. The minimum required creepage distances over an insulating material between electrically conducting parts...
- dependent on the creep (Joost Jacques Kalker's linear theory, valid for small creepage) or more advanced theories can be used from frictional contact mechanics...
- protection are required or a single measure of physical isolation such as creepage/clearance or solid insulation deemed equivalent." In addition to the insulation...
- with Hertzian geometry, with either lateral or spin creepage. Among others he found that spin creepage, which is symmetric about the center of the contact...
- suboptimal, longer insulators must be used. Longer insulators with longer creepage distance for leakage current, are required in these cases. Strain insulators...
- dynamics, this overall slip of the wheel relative to the rail is called creepage. It is distinguished from the local sliding velocity of surface particles...
- cast resin transformers, SF6 circuit breakers or vacuum switchgear, long-creepage solid-core insulators and PTFE-neutral sections. Eight-wheeled, self-propelled...
- which have corrugations moulded into their surfaces, is to provide enough creepage distance along their surface to prevent leakage current from the high voltage...
- standard specifies limits for parameters such as insulation strength, creepage distance, and leakage current. It also provides tolerances on the rating...