- (
CoCrMo), cobalt-nickel-chromium-molybdenum (
CoNi
CrMo) is also used for implants.[citation needed] The
possible toxicity of
released Ni ions from
CoNiCr...
-
striated muscle to
common arthroplasty-alloys: A
comparativein vivo
study with
CoCrMo, Ti-6Al-4V, and Ti-6Al-7Nb".
Journal of
Biomedical Materials Research Part...
- Ejiofor.
Increased osteoblast adhesion on
nanophase metals: Ti, Ti6Al4V, and
CoCrMo. Biomaterials.
Thomas J Webster,
Celaletdin Ergun,
Robert H Doremus, Richard...
- (1997). "Effect of
silicon ion
implantation on the
properties of a cast
Co–
Cr–
Mo alloy".
Journal of
Materials Science. 32 (14): 3727–3732. Bibcode:1997JMatS...
-
table to be
produced by his process: Cd, Zn, Ni, Pt, Pd, Fe, In, Tl,
Co,
Cr,
Mo, W, Cu,
which in turn are
called Rieke-nickel, Rieke-platinum, etc. Rieke...
- used to
improve the
adhesion of this
oxide scale to the substrate.
Cr, Fe,
Co,
Mo and Re all
preferentially partition to the γ
matrix while Al, Ti, Nb...
- (
CrCl3,
MoCl5 or WCl6) with magnesium, zinc or
aluminium powders...
under CO pressures".
CrCl 3 →
Reductant CO Cr (
CO ) 6 {\displaystyle {\ce {
Cr...
-
formula Cr 2O 3. It is one of the prin****l
oxides of
chromium and is used as a pigment. In nature, it
occurs as the rare
mineral eskolaite.
Cr 2O 3 has...
- with
Mo 75 520 35 240 25 CN-7M 20
Cr, 29 Ni, with
Co &
Mo 62 425 25 170 35 CN-7MS 19
Cr, 24 Ni, with
Co &
Mo 70 485 30 205 35 CW-12M Ni,
Mo &
Cr 72 495...
- properties.
These HEAFs were
prepared by
co-sputtering
deposition with a
single CrMnFe
CoNi
alloy and Al/Ti/V/
Mo/Nb targets. However, it
needs trial and...
